The fresh extruded electrodes are collected on trays & staked on trolley. Each trolley will carry 80 trays (Approximate 300 Kg green electrodes). The loaded trolleys are pushed inside the drying chamber from one end , by suitable pusher, one by one with a fixed time interval. The dried electrode trolley will come out from other end of the drying chamber. The total residence time will depend on the type of electrodes to be dried. Dried electrodes can go for packing or for baking.

Hot air circulation used for drying. Heating medium can be either Electrical.

Drying chamber is humidity & temperature controlled to achieve best drying effect in shortest possible time.
Drying parameters are computer controlled.

Technical Specification

Maximum temperature 150 Degree C.
Installed Power 250 kW.
Oven Capacity 22 Trolleys.
Capacity of Each trolley Approximate 300 Kg. of green Electrodes.
Trolley size 1000 x 1000 x 1900 mm.
No off trays / Trolley 80 nos.
Construction Welded frame structure, Modular design.
Air Circulation Centrifugal fan.
Heating media Electrical.
Length of drying section 22000 mm.
Over all dimension L – 35000 mm, W – 2100 mm , H – 2600 mm.

After drying baking type electrodes are pushed in side the baking oven. Here the electrodes are baked up to 450 0C.Total baking operation is computer controlled & programmable. Baked electrodes are cooled and sent for packing.

Technical Specification

Maximum operating temperatur 450 Degree C.
Connected load 500 kW.
Oven Capacity 22 Trolleys.
Capacity of Each trolley Approximate 250 Kg. of dried Electrodes.
Trolley size 1000 x 1000 x 1900 mm.
No off trays / Trolley 80 nos.
Heating media Electrical.
Construction Welded frame structure, modular design.
Air Circulation Centrifugal fan.
Length of Baking section 30000 mm.
Over all dimension L – 50000 mm, W – 2100 mm, H – 2600 mm.

Product List